Cadillac CTS - 2005 Owner'S Manual Download | Manualshive

Page: 104 / 124

background image

The normal battery voltage range is 11.5 to 15.5 volts.
You can monitor battery voltage on the DIC by selecting
Battery Voltage from the Vehicle Information menu.

Buckle Passenger

This symbol appears with
the Buckle Passenger
message.

This message reminds you to buckle the passenger’s
seat belt.

This message will display and a chime will sound when
the ignition is on, the driver’s seat belt is buckled, the
passenger’s seat belt is unbuckled with the passenger
airbag enabled and the vehicle is in motion. You should
have the passenger buckle their seat belt.

The reminder will be repeated if the ignition is on, the
vehicle is in motion, the driver is unbuckled and the
passenger is still unbuckled and the passenger airbag
is enabled. If the passenger’s seat belt is already
buckled, this message and chime will not come on.

Buckle Seat Belt

This symbol appears with
the Buckle Seat Belt
message.

This message reminds you to buckle the driver’s
seat belt.

This message will display and a chime will sound when
the ignition is on, the driver’s seat belt is unbuckled
and the vehicle is in motion. You should buckle
your seat belt.

If the driver remains unbuckled when the ignition is on
and the vehicle is in motion, the reminder will be
repeated. If the driver’s seat belt is already buckled, this
message and chime will not come on.

This message is an additional reminder to the Safety
Belt Reminder Light in the instrument panel cluster.
See “Safety Belt Reminder Light” in your vehicle’s owner
manual.

5-22

«
...
102
103
104
105
106
...
»

Summary of Contents for CTS - 2005





























































































































Reviews:

No comments

Related manuals for CTS - 2005

Brand: Panasonic Pages: 6

CQVX100U - Car Audio - DVD Receiver

Brand: Panasonic Pages: 46

CQVW100U - Car Audio - In-Dash DVD Receiver

Brand: Panasonic Pages: 46

Brand: Panasonic Pages: 20

Brand: Neo Car Audio Pages: 19

RoadMate 6000T - Automotive GPS Receiver

Brand: Magellan Pages: 119

RoadMate 6000T - Automotive GPS Receiver

Brand: Magellan Pages: 119

RoadMate 1400 - Automotive GPS Receiver

Brand: Magellan Pages: 81

RoadMate 1212 - Automotive GPS Receiver

Brand: Magellan Pages: 62

RoadMate 1212 - Automotive GPS Receiver

Brand: Magellan Pages: 60

Magellan Triton 1500

Brand: Magellan Pages: 33

Magellan eXplorist 300

Brand: Magellan Pages: 88

Magellan eXplorist 300

Brand: Magellan Pages: 89

Magellan eXplorist 300

Brand: Magellan Pages: 90

Maestro 4350 - Automotive GPS Receiver

Brand: Magellan Pages: 23

eXplorist - Hiking GPS Receiver

Brand: Magellan Pages: 70

Magellan eXplorist 300

Brand: Magellan Pages: 31

MITO Uconnect 5" Radio Nav LIVE

Brand: Alfa Romeo Pages: 99

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands