Cadillac CTS - 2005 Owner'S Manual Download | Manualshive

Page: 109 / 124

background image

Engine Coolant Hot – AC
(Air Conditioning) Off

This symbol appears with
the Engine Hot – AC Off
message.

This message displays when the engine coolant
becomes hotter than the normal operating temperature.
To avoid added strain on a hot engine, the air
conditioning compressor is automatically turned off.
When the coolant temperature returns to normal, the air
conditioning compressor will turn back on. You can
continue to drive your vehicle.

If this message continues to appear, have the system
repaired by your dealer as soon as possible to avoid
damage to the engine or transmission.

Engine Overheated – Stop Engine

This symbol appears
with the Engine
Overheated – Stop
Engine message.

This message will appear when the engine has
overheated. Stop the vehicle and turn the engine off
immediately to avoid severe engine damage. A chime
will also sound when this message is displayed.
See “Engine Overheating” in your vehicle’s owner
manual.

Notice: If you drive your vehicle while the engine
is overheating, severe engine damage may occur.
If an overheat warning appears on the instrument
panel cluster and/or DIC, stop the vehicle as soon
as possible. Do not increase the engine speed above
normal idling speed. See “Engine Overheating” in
your vehicle’s owner manual for more information.

5-27

«
...
107
108
109
110
111
...
»

Summary of Contents for CTS - 2005





























































































































Reviews:

No comments

Related manuals for CTS - 2005

Brand: Patton Pages: 4

Brand: Nav TV Pages: 2

Brand: Clarion Pages: 20

Brand: ASA Electronics Pages: 2

Brand: Hyundai Pages: 82

Brand: Boss Audio Systems Pages: 22

Brand: Multilaser Pages: 40

Brand: Crutchfield Pages: 8

Brand: VDO Pages: 4

Brand: Hyundai Mobis Pages: 105

Brand: Clarion Pages: 216

Brand: Ferrari Pages: 29

Brand: F&U Pages: 10

Brand: Volvo Pages: 41

Brand: r.LiNK Pages: 25

Brand: Boss Audio Systems Pages: 6

Brand: Boss Audio Systems Pages: 8

Brand: Boss Audio Systems Pages: 47

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands