Cadillac CTS - 2005 Owner'S Manual Download | Manualshive

Page: 93 / 124

background image

3. Press the TUNE/SEL knob to view the modes.

4. Scroll to Driver Unlock Key Out/Off and press the

knob once to select it.

When the mode is turned on, an X will appear in
the box to the left.

If you select Mode 1, Doors Lock in Gear (automatic
transmission) or Automatic Door Lock (manual
transmission) will be turned on automatically.

This feature cannot be selected if Driver Unlock in
Park (automatic transmission), Doors Unlock in Park
(automatic transmission) or Doors Unlock Key Out/Off is
selected. If any of these was previously selected, you
must first de-select it in order to be able to select Driver
Unlock Key Out/Off.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

Doors Unlock in Park
(Automatic Transmission)

The feature allows the doors to automatically unlock
when the transmission is shifted into PARK (P).
The following modes are available for selection:

Mode 1: ON

Mode 2: OFF

Before your vehicle was shipped from the factory,
it was programmed to Mode 2. The mode to which the
vehicle was programmed may have been changed
since it left the factory. To program the vehicle to
a different mode, do the following:

1. Enter the Personalization menu following the

instructions listed previously.

2. Scroll to Door Lock Options to highlight it.

3. Press the TUNE/SEL knob to view the modes.

4. Scroll to Doors Lock In Park and press the knob

once to select it.

When a mode is turned on, an X will appear in the
box to the left.

This feature cannot be selected if Doors Unlock Key
Out/Off, Driver Unlock Key Out/Off or Driver Unlock in
Park (automatic transmission) is selected. If any of
these was previously selected, you must first de-select it
in order to be able to select Doors Unlock in Park.

5-11

«
...
91
92
93
94
95
...
»

Summary of Contents for CTS - 2005





























































































































Reviews:

No comments

Related manuals for CTS - 2005

Brand: GROM Audio Pages: 16

Brand: Audiovox Pages: 4

Brand: Pioneer Pages: 16

Brand: Pioneer Pages: 28

Brand: Pioneer Pages: 32

Brand: Pioneer Pages: 60

Brand: Pioneer Pages: 22

Brand: Pioneer Pages: 76

AVIC-D3 - Navigation System With DVD Player

Brand: Pioneer Pages: 54

Brand: Pioneer Pages: 78

Brand: Pioneer Pages: 132

Brand: Pioneer Pages: 132

Brand: Pioneer Pages: 112

Brand: Pioneer Pages: 124

Brand: Pioneer Pages: 148

Brand: Pioneer Pages: 170

Brand: Pioneer Pages: 140

AVIC-F900BT/XS/EW5

Brand: Pioneer Pages: 187

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands