Cadillac CTS - 2005 Owner'S Manual Download | Manualshive

Page: 95 / 124

background image

Before your vehicle was shipped from the factory,
it was programmed to Mode 1. The mode to which the
vehicle was programmed may have been changed
since it left the factory. To program the vehicle to
a different mode, do the following:

1. Enter the Personalization menu following the

instructions listed previously.

2. Scroll to Delayed Locking using the TUNE/SEL

knob to highlight it.

3. Press the TUNE/SEL knob to switch back and forth

between on and off.

When the mode is turned on, an X will appear in
the box to the left.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

Lock Passenger Window

This feature allows you to disable either all the passenger
window switches or the rear passenger window switches
only. If this feature is turned on, all passenger window
switches will be disabled when the window lockout

button is pressed. If the feature is off, only the rear
passenger window switches will be disabled.
The following modes are available for selection:

Mode 1: ON

Mode 2: OFF

Before your vehicle was shipped from the factory,
it was programmed to Mode 2. The mode to which the
vehicle was programmed may have been changed
since it left the factory. To program the vehicle to
a different mode, do the following:

1. Enter the Personalization menu following the

instructions listed previously.

2. Scroll to Lock Passenger Window using the

TUNE/SEL knob to highlight it.

3. Press the TUNE/SEL knob to switch back and forth

between on and off.

When the mode is turned on, an X will appear in
the box to the left.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

5-13

«
...
93
94
95
96
97
...
»

Summary of Contents for CTS - 2005





























































































































Reviews:

No comments

Related manuals for CTS - 2005

Brand: Neo Car Audio Pages: 19

Brand: Patton Pages: 4

Brand: Roadmaster Pages: 24

Brand: Hyundai Pages: 135

Mobile Video 128-8342

Brand: Audiovox Pages: 26

Brand: Xomax Pages: 19

Brand: Delphi Pages: 8

NR-261UM-07-5WS

Brand: Mitsubishi Pages: 108

Brand: DROPSA Pages: 11

Brand: Sune Technology Pages: 16

QHI-LVTX-ES300H

Brand: Sune Technology Pages: 18

Brand: Pioneer Pages: 102

Brand: Pioneer Pages: 148

Brand: Pioneer Pages: 160

Brand: 10-8 Video Pages: 29

Brand: Dynavin Pages: 44

Brand: Eclipse Pages: 128

Brand: Eclipse Pages: 147

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands