Cadillac CT5 2020 Page 44 Owner'S Manual Download | Manualshive

Page: 44 / 325

background image

Cadillac CT5 Owner Manual (GMNA-Localizing-MidEast-13060107) - 2020 -

CRC - 8/29/19

44

SEATS AND RESTRAINTS

Identifying Driver Number

To identify the driver number:

1. Move your remote key away from

the vehicle.

2. Start the vehicle with another

remote key. The DIC should
display the driver number for the
other remote key. Turn the
vehicle off and remove the
remote key from the vehicle.

3. Start the vehicle with the initial

remote key. The DIC should
display the driver number of
your remote key.

Saving Memory Positions

Read these instructions completely
before saving memory positions.

To save preferred driving positions
1 and 2:

1. Turn the vehicle on or to ACC/

ACCESSORY with remote key 1
or 2.

A DIC welcome message may
indicate driver number 1 or 2.

2. Adjust all available memory

features to the desired driving
position.

3. Press and release SET; a beep

will sound.

4. Immediately press and hold the

1 or 2 memory button matching
the above DIC welcome message
until two beeps sound.

If too much time passes between
releasing SET and pressing 1, the
memory position will not be
saved and two beeps will not
sound. Repeat Steps 3 and 4.

1 or 2 corresponds to the driver
number. See

“

Identifying Driver

Number

”

previously in this

section.

5. Repeat Steps 1

–

4 for a second

driver using 1 or 2.

To save the position for

B

and

Seat Exit Memory features, repeat
Steps 1

–

4 using

B

. This saves the

position for getting out of the vehicle.

Save preferred memory feature
positions to both 1 and 2 if you are
the only driver.

Manually Recalling Memory
Positions

Press and hold 1, 2, or

B

to recall

the previously saved memory
positions if you are driver 1 or 2
identified in the DIC welcome
message.

To stop Manual Memory recall
movement, release 1, 2, or

B

or press

any of the following controls:

.

Power seat

.

Memory SET

.

Power mirror, with the driver or
passenger side mirror selected

.

Power steering wheel, if equipped

Seat Entry Memory

The vehicle identifies the number of
the current driver

’

s remote key (1

–

8).

See

Remote Keyless Entry (RKE) System

. If the remote key is 1 or

2, and Seat Entry Memory is enabled
in vehicle personalization, the

«
...
42
43
44
45
46
...
»

Summary of Contents for CT5 2020






































































































































































































































































































































Reviews:

No comments

Related manuals for CT5 2020

Brand: Yakima Pages: 4

Brand: 3SIXT Pages: 12

Brand: Phonocar Pages: 2

SmartShot Automatic 12V 1.5 Amp 5 Stage

Brand: Yuasa Pages: 44

Brand: Würth Pages: 36

2011 A3 Sportback

Brand: Audi Pages: 29

Brand: DriveRight Pages: 16

Brand: Paccar Pages: 63

Brand: Yakima Pages: 12

Brand: Curt Manufacturing Pages: 4

Brand: Whispbar Pages: 112

Brand: Prorack Pages: 14

Brand: Truma Pages: 16

Brand: RUSPA Pages: 5

Brand: Husky Pages: 18

Brand: LAS Pages: 9

Brand: Kia Pages: 828

2013 Civic Sedan

Brand: Honda Pages: 368

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands