Cadillac CT5 Owner Manual (GMNA-Localizing-MidEast-13060107) - 2020 -
CRC - 8/29/19
DRIVING AND OPERATING
165
Auto Stops may not occur and/or Auto
Starts may occur because:
.
The climate control settings
require the engine to be running
to cool or heat the vehicle interior.
.
The vehicle battery charge is low.
.
The vehicle battery has recently
been disconnected.
.
Minimum vehicle speed has not
been reached since the last
Auto Stop.
.
The accelerator pedal is pressed.
.
The engine or transmission is not
at the required operating
temperature.
.
The outside temperature is not in
the required operating range.
.
The vehicle is shifted out of D
(Drive) to any gear other than
P (Park).
.
The vehicle is on a steep hill or
grade.
.
The driver door has been opened
or the driver seat belt has been
unbuckled.
.
The hood has been opened.
.
The Auto Stop has reached the
maximum allowed time.
Auto Stop Disable Switch
The automatic engine Stop/Start
feature can be disabled and enabled
by pressing the switch with the
h
symbol. Auto Stop is enabled each
time you start the vehicle.
When
h
is illuminated, the system is
enabled.
Retained Accessory
Power (RAP)
When the ignition is turned from on
to off, the following features (if
equipped) will continue to function
for up to 10 minutes, or until the
driver door is opened. These features
will also work when the ignition is in
RUN or ACC/ACCESSORY:
.
Infotainment System
.
Power Windows (during RAP this
functionality will be lost when any
door is opened).
.
Sunroof (during RAP this
functionality will be lost when any
door is opened).
.
Auxiliary Power Outlet.
.
Audio System.
.
OnStar System.
Shifting Into Park
To shift into P (Park):
1. Hold the brake pedal down and
set the parking brake. See
.