Cadillac CT5 2020 Page 88 Owner'S Manual Download

Page: 88 / 325

Cadillac CT5 Owner Manual (GMNA-Localizing-MidEast-13060107) - 2020 -

CRC - 8/29/19

STORAGE

Storage

Storage Compartments

Storage Compartments . . . . . . . . . . . . 88
Glove Box . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Cupholders . . . . . . . . . . . . . . . . . . . . . . . . . 88
Center Console Storage . . . . . . . . . . . . 89

Additional Storage Features

Cargo Tie-Downs . . . . . . . . . . . . . . . . . . . 89
Safety Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Storage Compartments

{

Warning

Do not store heavy or sharp objects
in storage compartments. In a
crash, these objects may cause the
cover to open and could result in
injury.

Glove Box

Pull the handle from the side to open
the glove box. Close until it latches.
Use the vehicle key to lock or unlock.

Cupholders

Cupholders in the center console have
a retractable cover. Do not place items
on the cover.

Press the button to open the cover.

Summary of Contents for CT5 2020






































































































































































































































































































































Search results

Summary of Contents for CT5 2020

Reviews:

Related manuals for CT5 2020

Brands by name

Popular brands

Cadillac CT5 2020, Owner'S Manual

Search results

Summary of Contents for CT5 2020

Reviews:

Related manuals for CT5 2020

Brands by name

Popular brands