B.
Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of module and mount
USB support bracket (See
Fig. 15
) to surface using adhesive/tape or
screws (included).
Fig. 15
bracket
2.
Insert male terminal through hole in bracket (See
Fig. 16
) and connect to
female USB terminal (See
Fig. 12
)
Fig. 16
3.
Snap USB head (See
Fig. 16
) to bracket until flush (See
Fig. 17
)
Fig. 17
Connect
BLACK
wire to ground (radio chassis, radio ground wire etc.), and
RED
or
YELLOW
to accessory or battery supply. Your choice!
Tuck away any extra wires and verify
BLUE
LED is lit.
Media remote control
Pairing media button:
Ensure Bluetooth is enabled on your device (e.g.,
Smartphone/Tablet etc.)
Press and hold pause/play button (See
Fig. 18
) until Blue LED begins flashing
Scan smartphone for available devices and select
BT009
from list. (Blue LED
turns off).
Fig.18
Installation:
Attach the button to steering wheel (includes holder) or dashboard using
included double-side tape
–
your choice.
