Optional charging kit
(not for thumb drives etc.)
Optional charging kit is not a regular charger. It supports BC1.2, QC2.0, QC3.0,
PE1.1, PE2.0, FCP, SFCP fast charge protocols (Samsung, Huawei etc.).
Features:
» Input voltage:
6-24V DC
» Working current:
30mA
» Default output voltage:
5V or 3V-12V
(device dependent)
» Max output power:
24W
Should you decide to add it, we suggest one of 3 connecting options:
A
.
Flush to dash/panel requires drilling a ¾” hole
B
.
Flush with Support bracket
(Mount USB terminal wherever your installation
demands without drilling)
C
.
USB port-
(freestanding- default)
A.
Flush to Dash or Panel
(drilling required)
1.
Drill a ¾” hole in the dash or panel using a step drill bit or equivalent (See
Fig. 10
)
Fig. 10
Step drill bit
2.
Insert supplied USB male terminal (See
Fig. 11
) through hole created in step 1
and connect to module female port (See
Fig. 12
)
Fig. 11
Fig. 12
3.
Snap USB header (See
Fig. 13
) in place until flush with mounting
surface (See
Fig. 14
)
Fig. 13
header
Fig. 14
Flush mounted to dash
