Warning:
The A2DIY-CTSx will not operate in RAP (Retaine Accessory Power)
mode. Ignition must be turned ON in order to hold phone calls, stream
applications or listen to XM (if subscribed)
8.
Non-XM subscribers:
Connect included 3.5mm male to male audio cable
(See
Fig. 7
) to module
“AUX” jack
(See
Fig. 8
) and route other end to front
of the dash where aux device will reside (within 3ft.)
Fig. 7
audio cable
Fig. 8
Module inputs
9.
Install microphone to visor or headliner using included visor clip (See
Fig. 9a)
.
Fig. 9
Microphone
Fig. 9a
Visor clip
10.
Carefully route microphones plug down side pillar and behind the dash
and connect to module “MIC” input (See
Fig. 8
)
Excursive caution when routing microphone so to not damage the
cable and ensure no ventilation ducts are pointed towards
microphone
.
Visor
