Operation:
Once paired with smartphone/Tablet, users may perform the following functions
on iOS devices with Bluetooth 3.0 and later or Android 4.0 or later.
Media button functions are NOT applicable to the C5 radio.
0.
Charging:
Media button built-in rechargeable 200mAH battery may last up to 10 days. Use
supplied USB cable to charge. Red LED indicates charging; A full charge is
reached after 2 hours at which time LED turns off.
Module pairing:
Pairing varies among devices but basic steps are the same. This process is done
upon initial install and will not have to be repeated.
1.
Turn ignition and r
adio “ON”
LED inside module peephole will flash rapidly (pairing mode)
2.
On A2DP device: go to
Bluetooth Settings
3.
Select
Bluetooth
to enable
4.
Tap
Scan for devices
.
5.
Wait for Bluetooth device name (See
Fig. 19
) to appear and tap it.
Once
paired confirmation tone is heard on car speakers
Fig. 19
Noteworthy
: On Android devices it may be possible to change device
name to something of your choosing. This may not be possible on newer iOS
devices.
Warning:
Caller ID and text are
not shown on radio display
. Operate
Bluetooth device with smart remote, VR (voice recognition) or built-in
touch controls. Radio buttons can be used to adjust playback level
