Cadillac 2202 Escalade EXT Manual Download Page 321

Page: 321 / 427

6-9

Hood Release

To open the hood, do the following:

1. Pull the handle located

inside the vehicle to
the lower left of the
steering wheel.

2. Then go to the front of the vehicle and pull up on the

secondary hood release, located near the center of
the grill.

3. Lift the hood.

Before closing the hood, be sure all filler caps are on
properly. Pull down the hood and close it firmly.

Summary of Contents for 2202 Escalade EXT












































































































































































































































































































































































































































Search results

Summary of Contents for 2202 Escalade EXT

Reviews:

Related manuals for 2202 Escalade EXT

Brands by name

Popular brands

Cadillac 2202 Escalade EXT, Manual

Search results

Summary of Contents for 2202 Escalade EXT

Reviews:

Related manuals for 2202 Escalade EXT

Brands by name

Popular brands