Cadillac 2202 Escalade EXT Manual Download Page 83

Page: 83 / 427

2-17

Reinstalling the Rear Glass

To reinstall the rear glass, do the following:

1. Squeeze and pull down the latch levers (A),

located near the upper corners of the rear glass,
so they unlatch.

2. Hold the rear glass in place with one hand and turn

the glass lock knobs, located at both top corners of
the glass storage pocket, to the unlocked position.

3. Pull the rear glass out from the storage pocket using

the grab handles.

4. With the rear glass tilted at an angle, place

the bottom edge in the lower channel of the
window frame.

Summary of Contents for 2202 Escalade EXT












































































































































































































































































































































































































































Search results

Summary of Contents for 2202 Escalade EXT

Reviews:

Related manuals for 2202 Escalade EXT

Brands by name

Popular brands

Cadillac 2202 Escalade EXT, Manual

Search results

Summary of Contents for 2202 Escalade EXT

Reviews:

Related manuals for 2202 Escalade EXT

Brands by name

Popular brands