manualshive.com logo in svg

Cadillac 2202 Escalade EXT, Manual

The Cadillac 2202 Escalade EXT is a luxurious and powerful vehicle designed to make a bold statement on the road. Ensure optimal performance and functionality by conveniently downloading the comprehensive user manual for free from our website, manualshive.com. Find all the essential information you need to enhance your driving experience.

Share
Download
background image

6-19

Passenger Compartment Air Filter

The filter is located under the instrument panel below
the glove compartment.

To replace the passenger compartment air filter do the
following:

1. Remove the bolts on the access panel and set the

panel aside. Because this operation can be a little
difficult, you may choose to have it done at your
dealer’s service department.

2. Reach under the

instrument panel
towards the front of 
the vehicle and pull
downward on the filter
retaining bracket.

3. Remove the air filter by pulling downward on the

element. Remove the second portion of the air filter
by sliding it towards the rear of the vehicle and then
pulling downward.

4. Install the new filter by reversing the steps listed

previously. Be sure to follow any instructions that
may be included in the replacement filter package.

Refer to the Maintenance Schedule to determine 
when to replace the passenger compartment air filter.
See “Scheduled Maintenance” in the Index.

Automatic Transmission Fluid

When to Check and Change

A good time to check your automatic transmission fluid
level is when the engine oil is changed.

Change both the fluid and filter every 50,000 miles
(83 000 km) if the vehicle is mainly driven under one or
more of these conditions:
D In heavy city traffic where the outside temperature

regularly reaches 90

_F (32_C) or higher.

D In hilly or mountainous terrain.
D When doing frequent trailer towing.
D Uses such as found in taxi, police or delivery service.
If you do not use your vehicle under any of these
conditions, change the fluid and filter every
100,000 miles (166 000 km).

See “Scheduled Maintenance Services” in the Index.

Summary of Contents for 2202 Escalade EXT












































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2202 Escalade EXT

Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
APEXi V-AFC II Instruction Manual preview
V-AFC II
Brand: APEXi Pages: 18
Prorack K519 Fitting Instructions For Basic Carrier preview
K519
Brand: Prorack Pages: 15
Kia CADENZA 2019 Features & Functions Manual preview
CADENZA 2019
Brand: Kia Pages: 54
Metra Electronics 99-9001 Installation Instructions preview
99-9001
Brand: Metra Electronics Pages: 2
Bestop WrapAround Windjammer Installation Instructions Manual preview
WrapAround Windjammer
Brand: Bestop Pages: 7
Atwood Lippert Components LEVELEGS MPD 66385 Manual preview
Lippert Components LEVELEGS MPD 66385
Brand: Atwood Pages: 6
BMW 65 41 2 152 528 Installation Instructions Manual preview
65 41 2 152 528
Brand: BMW Pages: 21
Chrysler Stratus LHD 1997 Interactive Electronic Service Manual preview
Stratus LHD 1997
Brand: Chrysler Pages: 1534
Hyundai Santa Fe 2006 Owner'S Manual preview
Santa Fe 2006
Brand: Hyundai Pages: 280
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
Hyundai Entourage 2008 Quick Reference Manual preview
Entourage 2008
Brand: Hyundai Pages: 11
Prorack WHISPBAR S53 Fitting Instructions For Basic Carrier preview
WHISPBAR S53
Brand: Prorack Pages: 10
AMP Research BEDXTENDER HD MAX 74841-00A Assembly Installation Manual preview
BEDXTENDER HD MAX 74841-00A
Brand: AMP Research Pages: 9
Belkin F8V7058-APL User Manual preview
F8V7058-APL
Brand: Belkin Pages: 2
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
Kleinn RS-GM6 Installation Manual preview
RS-GM6
Brand: Kleinn Pages: 8
Toyota 4Runner 1999 Owner'S Manual preview
4Runner 1999
Brand: Toyota Pages: 285

Brands by name

Popular brands

Load more brands