Cadillac 2202 Escalade EXT Manual Download Page 22

Page: 22 / 427

1-16

Driver Position

This part describes the driver’s restraint system.

Lap-Shoulder Belt

The driver has a lap

shoulder belt. Here’s how to

wear it properly.

1. Close and lock the door.

2. Adjust the seat so you can sit up straight.

To see how, see “Seats” in the Index.

3. Pick up the latch plate and pull the belt across you.

Don’t let it get twisted.

4. Push the latch plate into the buckle until it clicks.

Pull up on the latch plate to make sure it is secure.
If the belt isn’t long enough, see “Safety Belt
Extender” at the end of this section.

Make sure the release button on the buckle is
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.

Summary of Contents for 2202 Escalade EXT












































































































































































































































































































































































































































Search results

Summary of Contents for 2202 Escalade EXT

Reviews:

Related manuals for 2202 Escalade EXT

Brands by name

Popular brands

Cadillac 2202 Escalade EXT, Manual

Search results

Summary of Contents for 2202 Escalade EXT

Reviews:

Related manuals for 2202 Escalade EXT

Brands by name

Popular brands