License Plate Lamp
To replace one of these bulbs:
1. Reach under the rear bumper for the bulb socket.
2. Turn the bulb socket counterclockwise and pull the
bulb socket out of the connector.
3. Pull the old bulb from the bulb socket, keeping the
bulb straight as you pull it out.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the bulb
socket.
Replacement Bulbs
Exterior Lamp
Bulb Number
Back-up Lamp
7441
License Plate Lamp
168
Sidemarker Lamp
194
Stoplamp/Taillamp/Turn Signal Lamp
3057
For replacement bulbs not listed here, contact your
dealer/retailer.
7-55
Ofrecido por www.electromanuales.com
Summary of Contents for 2010 Escalade EXT
