Cadillac 2010 Escalade EXT, Owner'S Manual

Page: 249 / 580

Deleting a Paired Phone
1. Press and hold
b g
for two seconds. The system
responds with “ Ready ” followed by a tone.
2. Say “ Bluetooth ” . The system responds with
“ Bluetooth ready ” followed by a tone.
3. Say “ Delete ” . The system asks which phone to
delete followed by a tone.
4. Say the name of the phone to be deleted. If the
phone name is unknown, use the “ List ” command
for a list of all paired phones. The system responds
with
“ Would you like to delete <phone name>? Yes
or No ” followed by a tone.
5. Say “ Yes ” to delete the phone. The system
responds with “ OK, deleting <phone name> ” .
Linking to a Different Phone
1. Press and hold
b g
for two seconds. The system
responds with “ Ready ” followed by a tone.
2. Say “ Bluetooth ” . The system responds with
“ Bluetooth ready ” followed by a tone.
3. Say “ Change phone ” . The system responds with
“ Please wait while I search for other phones ” .
. If another phone is found, the response will be
“ <Phone name> is now connected ” .
. If another phone is not found, the original
phone remains connected.
Storing Name Tags
The system can store up to thirty phone numbers as
name tags that are shared between the Bluetooth and
OnStar systems.
The system uses the following commands to store and
retrieve phone numbers:
. Store
. Digit Store
. Directory
Using the Store Command
The store command allows a phone number to be
stored without entering the digits individually.
1. Press and hold
b g
for two seconds. The system
responds with “ Ready ” followed by a tone.
2. Say “ Store ” . The system responds with “ Store,
number please ” followed by a tone.
3. Say the complete phone number to be stored at
once with no pauses.
. If the system recognizes the number it
responds with
“ OK, Storing ” and repeats the
phone number.
. If the system is unsure it recognizes the phone
number, it responds with
“ Store ” and repeats
the number followed by “ Please say yes or no ” .
4-69
Ofrecido por www.electromanuales.com