Cadillac 2010 CTS, Owner'S Manual

Page: 26 / 464

1-20 Keys, Doors and Windows
The switch is located on the driver ’ s
door. The vehicle must be in
P (Park) to use the power feature.
The taillamps flash when the power
liftgate moves.
{
WARNING
You or others could be injured if
caught in the path of the power
liftgate. Make sure there is no one
in the way of the liftgate as it is
opening and closing.
Notice: If you open the liftgate
without checking for overhead
obstructions such as a garage
door, you could damage the
liftgate or the liftgate glass.
Always check to make sure the
area above and behind the liftgate
is clear before opening it.
The power liftgate has three modes
of operation. Mode selection is
controlled by the interior mode
switch located on the driver door.
Choose the power liftgate mode by
turning the dial on the switch until
the indicator lines up with the
desired position.
The three modes are:
MAX: The liftgate power opens to
the full open height.
3/4: The liftgate power opens to a
reduced open height that can be set
by the vehicle operator in a range of
approximately ¾ open to full open.
Use this setting to prevent the
liftgate from opening into overhead
obstructions such as a garage door
or roof mounted cargo during power
operation. The liftgate can still be
opened fully manually.
OFF: The liftgate only operates
manually in this position.
Manual operation of a liftgate that
also has power operation requires
more effort than with a standard
manual liftgate.
In either the MAX or the ¾ mode,
the liftgate can be power opened
and closed by:
. Press and hold the power liftgate
button
& on the Remote
Keyless Entry (RKE) transmitter
until the liftgate starts moving.
See
Remote Keyless Entry
(RKE) System Operation
(Key Access) on page 1
‑ 5 or
Remote Keyless Entry (RKE)
System Operation (Keyless
Access) on page 1
‑ 7 .