5-2
Lighting
;
(Parking Lamps):
Turns on the
parking lamps together with the
following:
.
Sidemarker Lamps
.
Taillamps
.
License Plate Lamps
.
Instrument Panel Lights
5
(Headlamps):
Turns on the
headlamps, together with the
previously listed lamps and lights.
Exterior Lamps Off
Reminder
A warning chime will sound if the
exterior lamp control is left on in
either the headlamp or parking lamp
position and the driver's door is
opened with the ignition off.
Headlamp High/
Low-Beam Changer
Push the turn signal/lane change
lever away from you to turn the high
beams on. Pull the lever towards
you and then release it to return to
low beams.
If the vehicle is turned off while the
high beams are on, they will come
on the next time the vehicle is
started.
This indicator light turns on in the
instrument panel cluster when the
high beam headlamps are on.
Flash-to-Pass
This feature allows the high-beam
headlamps to be used to signal the
driver in front of you that you want
to pass.
Pull and hold the turn signal/lane
change lever toward you to use this
feature. When this is done the
following will occur:
.
If the headlamps are off,
in low-beam or in Daytime
Running Lamps (DRL) mode,
the high-beam headlamps will
turn on. They will stay on as
long as the lever is held there.
Release the lever to turn
them off.
.
If the headlamps are already in
high-beam mode, they will
remain on high-beam.
Summary of Contents for 2010 CTS
