Finally, the hood is connected to a Cadexair CC200-CC50 controller, for a control sequence that
complies with the ULC-S647 standard and the NFPA 96 standard.
BILL OF MATERIALS
HOOD MODEL
BILL OF MATERIALS
ST-10
Stadium hood with filters in front and a 1000 CFM maximum capacity
ST-20-1
Stadium hood with filters in front and a 2000 CFM capacity
ST-20-2
Stadium hood with filters in front and a 2000 CFM with double filter system
ST-20-T
Stadium hood with filters on top and a 2000 CFM capacity
ST-40
Stadium hood with filters on top and a 4000 CFM with double filter system
ST-40-T
Stadium hood with filters on top and a 4000 CFM capacity
CC200-CC50 CONTROLLER OPERATING SEQUENCE
Cadexair's CC200-CC50 controller (see Appendix 1) is a commercial kitchen hood control panel
that uses automatic detection technology to monitor hood filter saturation. It is designed to help
maintain proper ventilation and extend the life of the filters, thereby reducing maintenance and
operating costs.
Cadexair's CC20 control box (see Appendix 2) is equipped with differential pressure sensors that
measure air resistance across the hood’s filters. The sensors send this information to the CC200-
CC50 controller, which uses an algorithm to determine the saturation level of the filters.
When the filters reach a pre-set saturation level, the CC200-CC50 controller triggers a pre-alarm
to alert kitchen staff that it is time to replace the filters.
By monitoring and regulating hood filter saturation, the Cadexair CC200-CC50 controller can
extend the life of the filters by increasing the exhaust setting to compensate for the increase in
static pressure caused by the accumulated grease in the filters.
Consult the Cadexair CC200 controller manual for the options specific to CC50 and the project.
3
Summary of Contents for STADIUM Series
Page 1: ......
Page 21: ...APPENDIX 1 CC200 CC50 controller diagram 19...
