APPENDIX 3
Installating, adjusting and cleaning Geo-Vary filters
Position and adjust the opening of the Geo-Vary filters according to the plan.
1.
Unscrew the butterfly nut;
2.
Move the baffle to the required adjustment;
3.
Screw the nut back on tightly;
Incorrect adjustment can cause performance problems.
Cleaning the Geo-Vary module
When necessary, remove the Geo-Vary module from the hood's filtration casing, carefully noting
the side adjustment number of the sash as well as the location of each module.
Remove the sash from the module by removing the butterfly nut located in the air intake of the
module.
Place the sash and the module upside down in a dishwasher or simply wipe the inside of the sash
with hot water and degreasing detergent.
Re-insert the sash into the module to its original setting and tighten the butterfly nut located in
the air intake of the module.
21
Summary of Contents for STADIUM Series
Page 1: ......
Page 21: ...APPENDIX 1 CC200 CC50 controller diagram 19...
