15
SHELL - BREEZE
6.4
STOVE DOOR REMOVAL/INSTALLATION
DOOR REMOVAL
For some operations (e.g.: side panel assembly and cleaning) you must remove the stove door.
To remove the door:
• Open the door.
• Use a screwdriver to rotate the lever in the direction of the arrow (see
Fig. 19
).
• Lift the door to allow the door pivots to slide out of the structure bracket (see
Fig. 20
).
• Keep the door in a safe place until next use.
Fig. 19 - Remove screws
Fig. 20 - Door removal
DOOR ASSEMBLY
To assemble the door you must centre the pivots fixed to the door, on the structure bracket.
After having mounted the door with the screwdriver, lift the lever so that the door is locked.
6.5
SHELL
3
PS / SHELL
3
UP COATING REMOVAL
To access the internal stove parts, disassemble the side panels as indicated below:
• Remove the door and the rh and lh front profiles (see
Fig. 21
and
Fig. 22
).
• Remove the rear screws locking the coques. Remove the upper shell from above and the lower one by pulling it towards you.
(see
Fig. 23
,
Fig. 24
,
Fig. 25
and
Fig. 26
).
• For assembly, proceed in reverse order.
Fig. 21 - Door removal
Fig. 22 - Profile screws removal (rh and lh).
Fig. 23 - Front profile removal (rh and lh).
