Cadel LEAN3 PLUS, Installer Manual

Page: 30 / 32

WALL
3
PLUS - TILE
3
PLUS - MOON - LEAN
3
PLUS
30
DESCRIPTION TILE
3
PLUS
WIDTH 94,8 cm
DEPTH 28,8 cm
HEIGHT 110,8 cm
WEIGHT 125 kg
INTRODUCED THERMAL POWER (Min/Max) 3,16 - 11 kW
NOMINAL THERMAL POWER (Min/Max) 3 - 10 kW
EFFICIENCY (Min/Max) 94,5 - 91 %
FLUE GAS TEMPERATURE (Min/Max) 111 - 215 °C
MAXIMUM FLUE GAS FLOW RATE (Min/Max) 2,5 - 5,6 g/s
CO EMISSIONS (13% O2) (Min/Max) 0,0139 - 0,0095 %
OGC EMISSIONS (13% O
2
) (Min/Max) 5 - 4 mg/Nm
3
NOX EMISSIONS (13% O
2
) (Min/Max) 108 -104 mg/Nm
3
Average CO CONTENT at 13% O
2
(Min/Max) 174 - 119 mg/Nm
3
Average DUST CONTENT at 13% O
2
(Min/Max) 9,9 - 16,5 mg/Nm
3
FLUE NEGATIVE PRESSURE (Max) 10 Pa
ON SHARED FLUE NO
FLUE GAS EXHAUST DIAMETER Ø80 mm
FUEL Pellet Ø6-7 mm
PELLET HEATING CAPACITY 5 kWh/kg
PELLET HUMIDITY ≤ 10%
HEATABLE VOLUME 18/20°C Coeff. 0.045 kW (Min/Max) 72 - 240 m
3
HOURLY CONSUMPTION (Min/Max) 0,66 - 2,24 kg/h
HOPPER CAPACITY 18 kg
RANGE (Min/Max) 8 - 27 h
POWER SUPPLY 230 V - 50 Hz
ABSORBED POWER (Max) 350 W
STARTER RESISTANCE ABSORBED POWER 300 W
MINIMUM EXTERNAL AIR VENT (final cross-section) 80 cm
2
SEALED CHAMBER STOVE SI
EXTERNAL AIR VENT FOR SEALED CHAMBER 60 mm
DISTANCE FROM COMBUSTIBLE MATERIAL (back/side/bottom) 0 / 300 / 0 mm
DISTANCE FROM COMBUSTIBLE MATERIAL (ceiling/front)
750 / 1000 mm