26
LOCATION 210: PROGRAMMING TO REPORT EXIT ERROR
The Ranger 8600E has the ability to report an exit error code if an entry/exit zone is violated at the moment the exit
delay expires. The desired exit error code is programmed in location 210. If this location contains a "0", exit errors will
not be reported. When using 4+2 format, the number programmed in this location is sent as the "tens" digit. The "ones"
digit is automatically the man number. When using the remote arming input, the man number is 1. When using a one
button "Quick Arm" code the man number is 1.
LOCATION 211: PROGRAMMING TO REPORT RECENT CLOSING
The Ranger 8600E has the ability to report a recent closing code if an alarm occurs within 5 minutes of a closing. The
desired recent closing code is programmed in location 211. If this location contains a "0", recent closings will not be
reported. When using 4+2 format, the number programmed in this location is sent as the "tens" digit. The "ones" digit is
automatically the man number. When using the remote arming input, the man number is 1. When using a one button
"Quick Arm" code the man number is 1. For Auto-Arm, the man number is 9.
LOCATIONS 212-239: PROGRAMMING THE ARM/DISARM CODES FOR USERS 8-14
Locations 212-239 contain the arm/disarm codes for user numbers 8-14.
LOCATION 240: ENTERING THE NUMBER OF DIAL ATTEMPTS TO SECONDARY PHONE NUMBER
Location 240 is used to enter the number of dial attempts (1 to 15 attempts) the communicator will try to the second
phone number before ending the notification process. If this location contains an "8", the communicator will make 8
attempts to the second number, if a second number is programmed. If this location contains a "0", the number
programmed in location 134 will be used.
LOCATION 241: LISTEN-IN TIME
Location 241 is used to program Listen-In time in 30 second increments. Valid entries are 1-3 (1=30, 3=90).
LOCATION 242: RESERVED
LOCATION 243: ENTRY / KEYPAD SOUNDER
In Location 243, program an “8" to make a DATA entry of A12" in location 145-148 become an “ENTRY SOUNDER”.
LOCATIONS 244-249: ASSIGNING SPECIAL CHARACTERISTICS FOR ZONES 1-6
Locations 244-249 are used to assign individual characteristics for each of zones 1-6. These locations can be used to
enable or disable the Trouble Reporting, Group Bypass, Entry-Guard and Cross Zone feature for each of the
individual zones 1-6. To enable these features, enter a binary number according to the following chart:
VALUE
DESCRIPTION
1
Cross Zone
2
Entry Guard Zone
4
Group Bypass Zone (Shall not be programmed in UL Listed systems)
8 Trouble
Reporting
C
C
r
r
o
o
s
s
s
s
Z
Z
o
o
n
n
i
i
n
n
g
g
This feature requires a trip on 2 or more zones programmed as Cross Zones within the time frame programmed in
Location 255 (1-15 minutes). It is important that at least 2 zones be programmed for cross zoning if this feature is to be
used. First zone trip will initiate the keypad sounder, second zone trip creates an alarm. Either can be silenced by
entering a valid code.
E
E
n
n
t
t
r
r
y
y
G
G
u
u
a
a
r
r
d
d
An addition to modes described in location 131. Enable by adding "4" to the number programmed in location 131. When
enabled, all non Entry-Guard zones will be bypassed and all other zones will be delayed when the "Instant" LED is on.
When the "Instant" LED is off, all non-bypassed zones will resume their normal characteristics. The Entry-Guard feature
is activated by pressing the [
U
] key during the exit delay.
G
G
r
r
o
o
u
u
p
p
B
B
y
y
p
p
a
a
s
s
s
s
i
i
n
n
g
g
This feature will allow all zones programmed as group bypass zones to be bypassed by entering [
U
][9][
U
] when the
control is disarmed. NOTE: This feature shall not be enabled on UL Listed systems.
