CADDX Ranger 8600E, Installation Manual

Page: 32 / 35

32
APPENDIX 1 - REPORTING IN SIA FORMAT
The 8600E has the ability to report SIA level 1 transmissions to either or both phone numbers. Each report in SIA consists
of an Event Code and a Zone or User ID. The Zone or User ID is programmed in the first digit of each report. When
programming the event code (the second digit) for zones 1-8 (locations 105, 107, 109, 111, 113, 115, 117 or 119),
programming a zero will cause the event code to follow the zone type for that zone. The event code for the zone type can
be overridden by programming a digit from the table below. Duress (location 87), AUX 1 (location 89), AUX 2 (location 91),
and keypad Panic (location 93) must be programmed from the table below:
Programmed Event Code SIA Code Description
1 FA Fire Alarm
2 PA Panic alarm
3 BA Burglary Alarm
4 GA Gas Alarm
5 KA Heat Alarm
6 WA Water Alarm
7 QA Emergency Alarm
8 SA Sprinkler Alarm
9 UA Untyped Alarm
10 HA Holdup Alarm
11 MA Medical Alarm
12 ZA Freeze Alarm
13 TA Tamper Alarm
14 RP Periodic Test
15 YF System Fault
The following reports will send fixed event codes regardless of the number programmed in the event code location:
Event SIA Code Event Code Location
Keypad Tamper TA 95
Download Complete RS 97
Autotest RP 99
Fail to Communicate RT 101
Closing CL 102
Opening OP 103
AC Loss AT 121
Low Battery YT 123
Trouble *T 124
Bypass *B 125
Bypass Restore *U 125+126
Restore *R 126
Cancel OC 127
Maintenance Open OP 172
Maintenance Close CL 173
Exit Error EE 210
Recent Closing CR 211
Auxiliary 3 UA 253
User on site YY 254
*These will send the event code for the zone bypassed, restored, or in trouble.