P/N 466-5559-
EN • REV E • ISS 15OCT21
5 / 12
Users
There are the following menus:
•
Add/Modify: Add or modify an existing user
The following user details can be modified:
- First name, last name
- PIN
- User type (Standard / Duress / Arm only / Custom /
Master)
- Language
- Display Partition List (On / Off)
- Partition Group
- Door Group
- Partition Type Override (On / Off)
- Profiles 1 to 4 (0: Disabled / 1: All Partitions /
2: Partition N, etc.)
- Schedules 1 to 4 (0: Disabled / 1: Schedule N, etc.)
- Start Date, End Date: The time when the user is active
Note:
Partition Group and Door Group are available only if
the panel version supports Door Access features.
•
View: View existing user details.
•
Delete: Remove a user from the system.
•
Copy: Copy existing users to new ones.
Set the following parameters: Copy from user number,
copy to user number, total users to copy.
•
Search by PIN: Enter a PIN to search for the user. If the
PIN is found, you will move to the Add/Modify menu for the
user.
Note:
Only the Master user has access to the options listed
above. Standard users are only allowed to change their own
PIN and language.
Testing
The following tests are available:
•
Siren
•
Battery
•
Communicator
•
Zone Walk Test
•
Auto test
Time
Ensure your system has access to the Internet for automatic
time and date update, or set the clock manually from a keypad.
There are the following menus:
•
Time & Date: Set the time and date.
•
Holiday: View and program holidays.
Settings
There are the following menus:
•
Keypad: Adjust the following keypad settings:
- Display: Contrast, Brightness, Idle brightness, Color
- Key backlight: Brightness, Idle brightness, Color
- Sound: Tone, Keypress Volume, Alarm Volume,
Entry/Exit Volume
- Idle Timer
- 24H Format (Yes / No)
- Show Logo (Yes / No)
- Show Clock (Yes / No)
•
Labels: View and edit names of partitions, zones, and
outputs.
•
Reporting: View and edit reporting Email Addresses.
•
Status: View connection and device status.
- Connection Status: LAN Status, IP Path, Cellular State,
UltraSync Status, UltraSyncPath, Cellular Service, Signal
Strength of the cellular communication, Operator ID, Radio
Technology, Active SIM, Wi-Fi Status, Wi-Fi SSID, Device
Unique ID (UID)
- Panel Details
Performing Additional Functions
To Bypass and Unbypass Zones
The zone bypass menu is used to bypass (isolate) selected
zones in your security system. A bypassed zone is not capable
of activating an alarm, as it is temporarily disabled from your
system.
This option is commonly used to bypass zones that you wish to
temporarily add to your “stay mode”. Whilst still offering
security on the remaining zones, bypassing zones lowers your
level of security. All bypassed zones will reset and unbypass
when your security system is next disarmed. Your security
system must be disarmed (turned off) before being able to
bypass zones. After bypassing the selected zones, your
security system must be armed (turned on in either the away or
stay mode to secure the remaining zones.
1. Enter a valid PIN to unlock the screensaver
2. Press Enter.
3. Go to Security > Zones.
4. Select the zone you wish to bypass. Use Left (4) and
Right (6) buttons to apply a filter, if necessary. See
“Security” on page 4 for details.
5. Press Enter to see the list of available switch checkboxes.
The first one is Bypass.
Press Enter again to switch bypass mode on and off.
6. Press Cancel to exit the menu.
Alternatively, use the Quick Bypass function. See “Quick
Bypass
” on page 4 for details.
Set up Chime Mode
You can setup your keypad so that it will
make a “ding-dong”
sound when selected areas
are tripped or activated − this is
called chime.
Chime mode can be enabled or disabled for each partition, and
does not trigger any alarms. In this case it is only used as a
low level alert such as a customer entry door.
Note:
The chime feature in a zone requires both the zone and
its partition to have chime enabled.
You can easily enable or disable chime on partition level using
Quick Chime feature
. See “Quick Chime Toggle” on page 4 for
details.
1. Enter a valid PIN to unlock the screensaver.
2. Press Enter.
3. Go to Partitions or Zones.
