6 / 12
P/N 466-5559-
EN • REV E • ISS 15OCT21
4. Select the partition you want to add to chime mode.
5. Press Select (5).
6. Press Cancel to exit the menu.
Program User PINs
Each user has a unique PIN code that allows him access to
various features of the system. Only users with master level
authority are able to add, modify and remove users.
1. Enter a valid PIN code to unlock the screensaver.
2. Press Enter.
3. Go to Users.
4. Select the function you want to perform:
- Add/Modify: Add or edit a PIN and user permissions
- View: View the details and PIN of an existing user
- Delete: Delete a user
- Status: View the status of an existing user
- Copy: Duplicate existing users
5. Select the user.
6. Follow the instructions on the screen.
Change Time and Date and Holiday Dates
1. Enter a valid PIN to unlock the screensaver.
2. Press Enter.
3. Select the function you want to perform:
- Time & Date: Change the current time
- Holiday: Change the dates for the four (4) sets of
holidays
4. Follow the instructions on the screen.
Read Events Log
The system keeps a record of events that occur. The events
log can be accessed via the keypad.
1. Enter a valid PIN code to unlock the screensaver.
2. Press Enter.
3. Go to History.
4. Select the log category you want to display. The following
categories may be available depending on the panel
version:
- Main: All events except for the frequently occurring door
and card related events.
- Alarm: Intrusion and alarm related events, required by
EN50131 standard.
- Video: Camera related events.
- Access: Card and door related events. Available only if
the panel supports door access features.
Use Up (2) and Down (8) buttons to list events. Use the Right
(4) button to view more details on the selected event. See also
“History” on page 4.
Test Functions
Periodic testing of your security system is critical to ensure it
operates correctly and alarm messages are being sent in case
of an alarm detection.
1. Enter a valid PIN to unlock the screensaver.
2. Press Enter.
3. Go to Testing.
4. Select the security component you want to test:
- Siren: Test the siren functions. Indoor and outdoor sirens
will activate for the configured time. Press Cancel to
cancel the siren test.
- Battery: Test the battery if it is able to provide backup
power. The test is self-timed. It can take a few minutes to
return the result.
- Communicator Test: Test that the system is able to send
alarm messages. The result appears within a few
seconds.
- Zone Walk Test: Verify if each sensor is able to send
alarm signals to the system. You have to specify the range
of zones (as a start and an end zone) to perform the test.
The test procedure shows the list of zones being tested.
Activation of particular zones removes them from the list
until the list is empty, which means the test is passed. The
test is failed if there are still untested zones after the time
configured in the panel.
- Auto test: Test keypad display, indicators, key backlight,
and buzzer.
5. Follow the instructions on the screen to perform the test.
Set Keypad Options
The keypad can be customized for the requirements of your
site by setting the volume, brightness and screensaver timeout
time.
1. Enter a valid PIN to unlock the screensaver.
2. Press Enter.
3. Go to Settings > Keypad.
4. Select the setting to customize:
- Display: Contrast, Brightness, Idle brightness, Color
- Key backlight: Brightness, Idle brightness, Color
- Sound: Tone, Keypress Volume, Alarm Volume,
Entry/Exit Volume
- Idle Timer
- 24H Format (Yes / No)
- Show Logo (Yes / No)
- Show Clock (Yes / No)
Programming Cards
If the keypad is equipped with a Mifare card reader (NXG-
1832-EUR and NXG-1833-EUR) and the system supports door
access features, then the master user may configure user
cards in the “User Cards” menu.
Note:
The menu allows you to add or modify cards of the
existing users.
