P/N 466-5559-
EN • REV E • ISS 15OCT21
7 / 12
To modify a user card:
1. Enter a valid PIN code to unlock the screensaver.
2. Press Enter.
3. Go to User Cards.
4. Select the function you want to perform.
Add/Modify Card
Add or Edit the Card for user.
First, select a user by entering the user ID and confirm by
pressing ENTER.
The screen shows “Swipe a Card or type ID”.
You can either change/enter the card number on the keypad or
swipe the card (this is the recommended method).
If the card is swiped, it will be automatically secured if
necessary
— the security key will be applied to the card.
Note:
Present the card to the reader and hold it until the
keypad beeps. If the securing operation is required, it may take
1 to 2 seconds to apply the security key to the card.
If securing the card succeeds, a special two-tone sound is
generated.
If the card number is entered on the keypad, the card must be
secured manually (for example, using the Card Securing
option).
Card Enable/Disable
Allows to enable or disable the card, which is already assigned
to the user.
First, selected the user by entering the user ID and confirm by
pressing ENTER.
Alternatively, a user card may be swiped to select its user.
Next, change the Enable parameter as desired.
Delete Card
First, selected the user by entering the user ID.
Alternatively, a user card may be swiped to select its user.
Once the user is selected, the card assigned to the user is
removed.
Add Multiple Cards
The option allows you to assign cards to multiple existing
users.
Note:
This is the easiest and recommended method for adding
cards to users at the system initial configuration.
First, all user accounts must be created using any convenient
method (DLX900 / Web page / Users menus).
Enter the Add Multiple Cards option on an NXG-1832 / NXG-
1833 keypad as a master user.
The keypad shows the list of users with no card assigned. If all
users already have cards assigned, the relevant message is
shown.
Only one user is shown at a time, starting from the lowest user
ID. Users can be selected by pressing Up and Down buttons.
Once the user number is shown on the screen, present the
card to the reader. This runs the following operations: assign
the card to user, enable the card, and secure the card.
Note:
Present the card to the reader and hold it until the
keypad beeps. If the securing operation is required, it may take
1 to 2 seconds to apply the security key to the card.
If securing the card succeeds, a special two-tone sound is
generated.
After successful assignment, the user is removed from the list
of users, and the keypad automatically switches to the next
user with no card assigned or displays a message “All Users
have Cards”.
Secure Cards (Card information)
The option allows you to secure multiple cards. Also, it may be
used as a “Card Information” option.
It is recommended (but not required) to perform the securing
operation on all spare cards that are not used in the initial card
configuration. This allows you to assign these cards to new
users in the future by entering the card ID without a need of
swiping the card to the reader.
Once entered, the menu shows “Swipe a card” message. Any
card swiped when the function is active will be secured, and a
relevant message will be shown for a few seconds.
Note:
The Secure Cards menu can also be used to get the
information about cards. You can present cards already
secured or assigned to users. The keypad screen will show the
message that the card is already secured and display the user
ID and enable state.
System Status Messages
Various messages may appear on status screen of the keypad.
Alarms
The following alarms can appear:
•
Panic Alarm
•
Medical alarm
•
Burglary alarm (in this case only the zone name is shown).
•
Fire alarm
If there are alarms, no other status messages are shown on
the system status screen. Press the System Info (
i
) button to
view alarms.
•
Zone in Alarm, zone number and name
•
SOS
– Fire alarm
•
SOS
– Panic alarm
•
SOS
– Medical alarm
If a manual alarm is activated using the keypad function
buttons (A, B, C), no zone info is shown.
Categories other than alarms can be displayed alternately.
Faults
The following faults can appear:
•
Time Lost: The security system time and date need
resetting. Ensure your system has access to the internet
for automatic time update or set the clock manually from a
keypad.
