4 / 12
P/N 466-5559-
EN • REV E • ISS 15OCT21
A short press on the button will initiate the function.
If programmed, holding the button for 2 seconds will generate
one the following emergency alarms:
•
A: Fire alarm
•
B: Medical alarm
•
C: Panic alarm
Emergency Alarms
Panic, Medical, and Fire alarms must be enabled in the
partition options.
Hold the appropriate functional button for 2 seconds to activate
the emergency alarm.
Quick Chime Toggle
The button enables or disables the keypad Chime.
Quick Chime ON
A zone that is enabled for Chime will make the keypad to make
a
“ding-dong” sound when the sensor is tripped. Button C is by
default enabled for Quick Chime.
Quick Bypass
If the partition cannot be armed because a zone is not ready,
press System Info (
i
) to show the list of zones that are not
ready.
Zone Not Ready
12-Front Window
Scroll through the list of zones and press the Quick Bypass
button (by default button B) for each displayed zone that needs
to be bypassed. Press Quick Bypass again to unbypass the
displayed zone.
Press Cancel to exit.
Text Edit
When editing text or entering a PIN code, the following buttons
are available:
•
Function buttons:
- A: Cursor mode. Press A, then Left or Right to move the
cursor. Press A again to return to the character input
mode.
- B: Backspace.
- D: Delete.
•
Numerical buttons: 1 to 9 have alphabetical characters. To
enter a letter, press the key the number of times to the
position of the letter. Both upper and lower case letters are
available as well as numerical values and spaces.
•
Enter: Confirm changes.
•
Cancel: Discard changes and exit.
Note:
Use numerical buttons 1 and 2, and functional button C
to insert special characters. Press multiple times to select a
special character and add it to the text.
Navigating the Main Menu
To enter the user or programming menu, depending on the
user privileges, press Enter, enter your PIN, then press Enter
again.
Top line of the LCD screen shows the current menu.
Bottom line allows you to select a submenu, or change the
option value, for example:
Security
Zones
Zones
Main entrance
Use Up (2) and Down (8) buttons to navigate the menu and
change option values. Use Enter to confirm, and Cancel to exit.
See also “Text Edit” above.
The following user menus and operations are available.
Security
There are the following menus:
•
Partitions: This menu allows you to view and control each
partition of the security system, activate/deactivate Chime
mode for a Partition.
•
Zones: This menu allows you to view the zone status,
bypass zones, and activate Chime for zones.
•
Doors: If the panel supports door access feature, then the
Doors menu is available, and allows you to view door
statuses and control doors (unlock, disable, etc.)
•
Smoke Reset: This function performs a reset on hardwired
smoke detectors connected to your xGen security system.
A reset is required after each fire alarm or fault.
When viewing partitions, zones, and doors, use Up (2) and
Down (8) buttons to select the particular partition, zone, or
door. Use Left (4) and Right (6) buttons to apply one of the
following status filters:
•
All
•
Off normal
•
Not Ready
•
Bypassed
•
Chime Enabled
•
Away Armed
•
Part Armed
•
In alarm
•
In tamper
•
In trouble
Controls
Action: View and activate actions.
History
This menu gives you access to the xGen event log. The event
log shows the most recent event first.
Log category may be selected on entry to the menu.
Use Up (2) and Down (8) buttons to list older events. Use the
Right (4) button to view more details on the selected event.
