1
2010 POWERDRIVE IDS CONTROL SYSTEM USER MANUAL
2010 POWERDRIVE IDS™
QUICK RELEASE SYSTEM (QRS)
You should be familiar with the operation of the
QRS in the event of a situation where you wish to
activate the QRS feature.
QRS - OPERATION
Grab the release body and fi rmly push
away from your body (in the direction of
the arrow) until the pin is free (Fig.1).
Activating this primary quick release (QR1) will still
leave you attached to your kite via the IDS land-
ing line. For complete separation from your kite,
you will need to activate QR2. This is covered in
detail in the IDS Landing Line Operation section
on page 20 & 21.
QRS - SETTING / RESETTING
• Slide the QR Pin through the stainless steel
Trapezoid. (Fig. 2)
• Fold the pin back over itself. (Fig. 3)
• Lift the QR Body up the Depower line.
(Fig. 3)
• Lower the QR Body over the QR Pin. (Fig. 4)
• Your QR system is now ready for use.
FIG 1
FIG 3
FIG 2
FIG 4
OPERATION
Powerdrive_IDSX_ENG_final.indd 15
28/3/09 5:49:28 PM
