1
2010 POWERDRIVE IDS CONTROL SYSTEM USER MANUAL
SECURITY PIN
The harness loop is the rider’s primary connection to
the depower system, as long as it is equipped with a
security pin. This security pin is active only when the
rider is hooked into the harness loop. Therefore, it is
important that a secure connection is made between
the Harness Hook and the Harness Loop. This criti-
cal connection allows you to depower the kite, spin
your bar freely, and re-launch your kite easily, all
while still being connected to your kite.
• We suggest that you engage the Security Pin
only when ready to launch and/or the Bypass
Leash is connected.
SECURITY PIN – ENGAGING
• Double check that your QR and control system
are set up properly.
• Hook into your harness loop.
• Once hooked into the harness loop, only engage
the Security Pin once you are ready to launch.
• Insert the Security Pin into the center of the
harness hook, making sure it is below the
harness loop. Your harness loop must be
between the harness hook and the Security
Pin in order for this feature to work properly.
(Fig. 1 & 2)
• Make sure that the Security Pin is secure. This
will keep your harness loop from accidentally
dropping out of your harness hook.Your Security
Pin is now ready for use.
SECURITY PIN – RELEASING
With your hands, slide the Security Pin out of the
harness hook. (Fig. 3)
FIG 1
FIG 2
FIG 3
OPERATION
CAUTION
: Be advised that when the Security
Pin is engaged, you have a semi-permanent
connection to the kite. As a precaution, know
where your Quick Release Handle is and be
educated on how to activate it before engaging
the Security Pin.
Powerdrive_IDSX_ENG_final.indd 16
28/3/09 5:49:30 PM
