Configuring the Trap Table
3-28
Trap Messages
SDLC No CTS on link
721
A necessary CTS was not received from the DCE.
Severity
Major (Level 2)
Action
Check the modem to make sure it is operational.
SDLC No External Clock
722
The necessary clock is not being provided.
Severity
Major (Level 2)
Action
Check the modem to make sure it is operational.
SDLC LLC/2 Remote Link Stn lost
736
The remote station is not responding. Either the Inactivity Timer
(Ti)
or
Acknowledgment Timer
(T2)
has expired.
Severity
Major (Level 2)
Action
Check the remote station to make sure it is operational.
LLC/2 DM Received
737
The remote station sent a Disconnect Mode response and the logical link is down.
Severity
Major (Level 2)
LLC/2 SABME Received when open
738
The remote station sent a SABME to the local station, but the local station had
already been initialized via a SABMEÑUA exchange.
Severity
Major (Level 2)
Action
None; however, if the problem persists, contact your support
representative.
LLC/2 FRMR Rcvd, Invalid Command
739
The remote device received an invalid or unsupported command, and returned a
Frame Reject.
Severity
Major (Level 2)
LLC/2 FRMR Rcvd, IFLD not permitted
740
The remote device received an I-frame when it was not permitted, and returned a
Frame Reject.
Severity
Major (Level 2)
LLC/2 FRMR Rcvd, Invalid Nr
741
The remote device received an invalid N
(R),
and returned a Frame Reject.
Severity
Major (Level 2)
Summary of Contents for SPECTRUM FRX6000
