Cabletron Systems SPECTRUM FRX6000, User Manual

Page: 101 / 232

Frame Relay Backup Groups 5-13
Frame Relay Status and Configuration
parameters can be conÞgured, except specifying a Backup Group Number for the
primary DLCI on the initiating node. The next step is to conÞgure your Backup
Groups using the information in this section. You can then return to your DLCI
conÞguration and enter the appropriate Backup Group Number that will assign a
backup group to each primary DLCI.
Configuring Frame Relay Backup Groups
Use the Frame Relay Backup Groups window to conÞgure backup groups. To
access the window:
1. Click on the button to display the Device menu.
2. Drag down to Frame Relay Backup Group, and release. The Frame Relay
Backup Group window,
Figure 5-3 , will appear.
Figure 5-3. Frame Relay Backup Group
The list box at the top of the window displays each backup DLCI and the group it
is assigned to; the Þelds and buttons in the lower portion of the window allow
you to add new entries and modify or delete existing ones.
Each backup DLCI is conÞgured using the following parameters: