Using the FRX4000, FRX6000, and SmartSwitch 1800 Hub View
2-32
Managing the Hub
Receive Error Ratio
Shows the threshold for the Receive Error
Ratio statistic. This statistic is the ratio of
frames rejected per second to frames
accepted per second on the port.
Transmit Percent Utilization
Shows the threshold for the Tx Utilization %
statistic.
Receive Percent Utilization
Shows the threshold for the Rx Utilization %
statistic.
Managing the Hub
In addition to the performance information described in the preceding sections,
the Hub View also provides you with the tools you need to conÞgure your device
and keep it operating properly. Hub management functions include setting the
polling intervals, and enabling and disabling serial ports.
Setting the Polling Intervals
To set the polling intervals used by SPMA and the FRX:
1.
Click on
to display the Device menu.
2.
Drag down to Polling Intervals, and release.
Figure 2-17. FRX Hub View Polling Intervals
3.
To activate the desired polling, click mouse button 1 on the selection box to
the right of each polling type field.
Summary of Contents for SPECTRUM 1800
