Configuration Commands
80-10200000-01
4–17
4.5.6.2 Call control menu
A) ANSWER
Determines how the SBU128 responds to an incoming
call.
A) AUTO (F)
Answers an incoming call
automatically.
B) CLID
Answers the call only if the
originating number matches
a number in the CLID store.
Otherwise the call is
rejected.
C) MANUAL
Awaits the user to command
the SBU128 to answer.
D) CALL BACK
1
The incoming call’s
originating number is
checked against the CLID
store, the call is then cleared,
then the originator is called
back also using the sub-
address (if one is entered) in
the CLID store.
1
With Call Back enabled, the Delay After Attempt in the Cyclic Dial menu
must be set to at least 5 seconds at the calling unit, to allow for the call back
to occur.
Summary of Contents for SmartSwitch SBU128
Page 3: ...SBU128 User Manual 80 10200000 01 iii History Sheet 80 10200000 01 V1 00 Software 31 July 1998...
Page 74: ...SBU128 User Manual 80 10200000 01 11 2 11 1 Configuration Menu...
Page 75: ...Command Maps 80 10200000 01 11 3...
Page 76: ...SBU128 User Manual 80 10200000 01 11 4 11 2 Operation Menu...
