Configuration Commands
80-10200000-01
4–15
D) USER RATE
NOTIFICATION
A) DISABLED (F)
User rate information not
sent.
B) ENABLED
Enables the transmission of
the user rate speed
information in the ISDN call
setup.
E) C/DTR
Selects what the DTR or C input should be.
A) NORMAL (F)
Input comes from the DTE.
B) FORCED ON
Input is forced on in
SBU128.
C) FORCED OFF
Input is forced off in
SBU128.
F) I/DCD
Selects what the DCD or I output should be.
A) NORMAL (F)
Output comes from the
SBU128.
B) FORCED ON
Output is forced on from the
SBU128.
C) FORCED OFF
Output is forced off from the
SBU128.
G) DSR
Selects the required DSR output.
A) NORMAL (F)
Output comes from the
SBU128.
B) FORCED ON
Output is forced on from the
SBU128.
C) FORCED OFF
Output is forced off from the
SBU128.
Summary of Contents for SmartSwitch SBU128
Page 3: ...SBU128 User Manual 80 10200000 01 iii History Sheet 80 10200000 01 V1 00 Software 31 July 1998...
Page 74: ...SBU128 User Manual 80 10200000 01 11 2 11 1 Configuration Menu...
Page 75: ...Command Maps 80 10200000 01 11 3...
Page 76: ...SBU128 User Manual 80 10200000 01 11 4 11 2 Operation Menu...
