Testing & Replacing Components
3-5
3. Check the following:
●
Power Supply:
◆
Measure the AC voltage.
◆
Measure the DC output voltages (+12V, -12V, +5V).
●
Motherboard:
◆
Measure the DC input voltages.
Replacing Memory Modules
Location – see
Figure 3-3
(on
page 3-2
). Cabletron part numbers:
DRAM (8 Mb) = 85207015, Flash (4 Mb) = 09-44-15-005.
1. If the cover is not already off, remove it. (See
page 3-3
.)
2. Spread the metal spring clips apart and pull the SIMM forward
as shown in the following figure.
Figure 3-6 SIMM
3. Handling the module only by the edges, remove the SIMM from
the slot. Avoid touching any components, and never touch a
gold-plated edge connector. (If you do, clean it with a lint-free
cloth dipped in isopropyl alcohol.)
4. Place the removed module into an anti-static bag. If one is not
handy, set the module aside until after step 5, then use the bag
that contained the replacement module.
Spring Clip
Spring Clip
Summary of Contents for Netlink FRX4000
