Configuration Commands
80-10100000-09
4–43
1> SPID
[CR]
To clear a SPID that has been set, type:
1> SET SPID CLEAR
[CR]
the SPID value will then be erased. If this command is entered, a new
SPID value must be entered before the KBU 64 is used again.
A SPID value that has been set can of course be changed using the
SET
SPID
command.
4.22.2 USA Switch Type
The KBU 64 can be set to operate with two kinds of public switch in the
USA, as each switch requires slightly different signalling.
DMS-100 and AT&T 5ESS types are available with the following
commands:-
To set the DMS-100 Switch Configuration, type:
1> SET SWITCH DMS
[CR]
To set the AT&T 5ESS Switch Configuration, type:
1> SET SWITCH ATT
[CR]
To display the switch type that has been set, type:
1> SWITCH
[CR]
The default setting is DMS-100.
