Configuration Commands
80-10100000-09
4–7
To enable or disable these messages, type:
1> SET HELP xx
[CR]
where
xx
is either
ON
(enabled) or
OFF
(disabled).
4.7 Setting the System Time, Date and Day
After correctly installing your KBU 64, one of the first configuration
requirements will be to correctly set the system time, date and day of
week.
To do this, at either the
1>
or
2>
prompt, type:
1> SET TIME hh:mm
[CR]
where:
hh
represents the current time in hours (using a
24 hour clock).
mm
is the number of minutes past the hour.
The set time will be implemented as soon as you have pressed the
carriage return key.
1> SET DATE dd/mm/yy
[CR]
where:
dd
represents the day of the month (01 to 31)
mm
represents the month (01 to 12)
yy
represents the current year (e.g. 95)
This system date will be implemented as soon as you have pressed the
carriage return key.
1> SET DAY xxx
[CR]
where
xxx
is the first three letters of the current day of
the week (i.e.
mon, wed, thu
)
