KBU 64
User Manual
80-10100000-09
4–36
4.15.13 DIAL Timer
Defines the length of time your KBU 64 will take to redial following an
unsuccessful ISDN call:
1> SET DELAY DIAL xxx
[CR]
where
xxx
is the time in seconds (0 to 999).
Note This DIAL timer is only used during alternate redialling of
telephone numbers, as detailed in section
4.14
.
4.15.14 REDIAL Timer
Defines the length of time taken by the KBU 64 between complete
Alternate Re-dialling cycles:
1> SET DELAY REDIAL xxx
[CR]
where
xxx
is the time in seconds (0 to 999).
Note This REDIAL timer is only used during alternate redialling of
telephone numbers, as detailed in section
4.14
.
4.15.15 PASSWORD Timer
Defines the length of time that password entry is enabled. After the
defined period, without any command port activity, the user is logged
out. (See also section
4.20
on Password Protection.)
1> SET DELAY PASSWORD xxx
[CR]
where
xxx
is the time in seconds (0, or 5-999).
The value of 0 causes the password entry to never time out.
The default setting is 60 seconds.
