INSTALLING THE IRM
3-5
1. MMAC 3. IRM
2. Knurled Knobs 4. Slot 1
Figure 3-2
Installation
3.4
CONNECTING THE IRM TO THE NETWORK
This section provides procedures for connecting the IRM to the network
via the AUI Ports or the BNC Port.
3.4.1
Connecting to the Network Via the AUI Port
To connect to the network via either AUI Port:
CAUTION
: Be sure to disable the SQE test function on the transceiver will
be connecting to the IRM's AUI Port. Failure to do so will result in
improper operation of the IRM. Refer to the applicable transceiver
manual.
1. Attach an external transceiver to the segment to which the AUI Port
will be attached. Refer to the applicable transceiver manual.
IRM
SN
R
C
K
FAIL
CLN
1
M
A
U
3
2
3
P
O
K
C
O
N
S
O
L
E
A
U
I
2
A
U
I
1
RESET
1
2
3
2
4
