The ATM Redundancy Configuration Screen
HSIM-A6DP User’s Guide
3-21
3.8.9
Using the TEST PORTS NOW Command
To force the HSIM-A6DP to perform a redundancy test immediately,
perform the following steps:
1.
Use the arrow keys to highlight the TEST PORTS NOW command.
2.
Press ENTER. The HSIM-A6DP performs the redundancy test, and
displays the results in the Result of previous test field.
3.8.10
Using the RESET TO FACTORY DEFAULTS
Command
To reset all the values of the ATM Redundancy Configuration screen to
the factory default values, perform the following steps:
1.
Use the arrow keys to highlight the RESET TO FACTORY
DEFAULTS command.
2.
Press ENTER. All configurable options on this screen are reset to their
default values.
NOTE
Using the TEST PORTS NOW command will cause the active
port to be disabled for up to 2 seconds.
Summary of Contents for HSIM HSIM-A6DP-
