Chapter 3: Local Management
3-60
HSIM-A6DP User’s Guide
3.20
THE ADD/DELETE ENTRY SCREEN
To access the Add/Delete Entry screen from the ATM Connection Setup
screen perform the following steps:
1.
Use the arrow keys to highlight the ADD/DELETE command at the
bottom of the ATM Connection Setup screen.
2.
Press ENTER, the Add/Delete Entry screen,
Figure 3-19
, displays.
Figure 3-19
The Add/Delete Entry Screen
3.20.1
Add/Delete Entry Screen Fields
IF (Modifiable)
This field represents the MIB-II interface on which the new PVC will be
created. If multiple PVCs will be created on one MIB-II interface, the
number of the desired interface should be entered in this field. If a new
MIB-II interface will be used for the new PVC this field can be left at “0”.
The HSIM-A6DP will automatically use the next available interface for
this PVC.
INTERFACE 25 ATM Add/Delete Entry
Device Name:6E132-25
Slot Number: X
Flash Image Revision: XX.XX.XX
BOOTPROM Revision:XX.XX.XX
RETURN
IF
VPI
VCI
AAL Type Encapsulation Type BW (Mbps)
0
0
0
[ 5 ]
VC Mux 802.3 Bridged 1
ADD/MODIFY
EXIT
6E132-25 LOCAL MANAGEMENT
Total Bandwidth On Interface: 155
Total Bandwidth Allocated: 125
Summary of Contents for HSIM HSIM-A6DP-
