DIGITAL GIGAswitch/Router User Reference Manual
9
Configuring the DIGITAL GIGAswitch/Router
To exit Enable mode and return to User mode, use one of the following commands:
Configure Mode
Configure mode provides the capabilities to configure all features and functions on the
GSR. You can configure features and functions within Configure mode including router
configuration, access control lists and spanning tree.
To list the Configure commands, enter:
The Configure mode command prompt consists of the GSR name followed by the pound
sign (#):
To list the commands available in Configure mode, enter a question mark (
?
) as shown in
the following example:
smarttrunk
- Show SmartTRUNK information
snmp
- Show SNMP related parameters.
statistics
- Show or clear
GSR
statistics
stp
- Show STP status
system
- Show system-wide parameters
tacacs
- Show TACACS related parameters
tacacs-plus
- Show related parameters
telnet
- Telnet utility
traceroute
- Traceroute utility
vlan
- Show VLAN-related parameters
web-cache - Configure web caching parameters
Exit Enable mode.
exit
Ctrl+Z
List the Configure commands.
?
gs/r(config)#
gs/r(config)#
?
acl
- Configure L3 Access Control List
acl-edit
- Edit an ACL in the ACL Editor
acl-policy
- Configure ACL policy
aging
- Configure L2 and L3 Aging
arp
- Configure ARP entries
bgp
- Configure Border Gateway Protocol (BGP)
cli
- Modify the command line interface behavior
dhcp
- Configure DHCP server
dvmrp
- Configure DVMRP related parameters
exit
- Exit current mode
