manualshive.com logo in svg

Cabletron Systems CyberSWITCH CSX400, User Manual, Page: 99 / 275

Share
Download
Cabletron Systems CyberSWITCH CSX400 User Manual Download Page 99

CSX400 Configuration with QuickSET

CSX400 and CSX400-DC User’s Guide

85

Once the E1 WAN configuration is complete, click on the Next>> button and go to the 

Wide Area 

Frame Relay Time Slot Configuration Window

 or 

Wide Area PPP Time Slot Configuration 

Window

 section, depending on which protocol you are using.

Wide Area DI Configuration Window

The Wide Area (DI) configuration window shown in 

Figure 29

 displays after clicking on the 

Next>> button in the Ethernet 1 and 2 configuration window or the Wide Area Frame Relay Time 
Slot and PPP configuration windows, depending on whether you have installed one or two WPIMs 
in the CSX400, and in what order you are configuring them.

This section explains how to configure the CSX400 Wide Area DI interface using QuickSET.

Figure 29

 

Wide Area DI Configuration Window

NOTE

The service provider (i.e., AT&T, Sprint, MCI, etc.) determines the settings for the 
following fields. Consult the service provider for the correct settings.

Summary of Contents for CyberSWITCH CSX400




















































































































































































































































































Reviews:

No comments