manualshive.com logo in svg

Cabletron Systems CyberSWITCH CSX400, User Manual, Page: 257 / 275

Share
Download
Cabletron Systems CyberSWITCH CSX400 User Manual Download Page 257

Specifications and Standards Compliance

CSX400 and CSX400-DC User’s Guide

243

WPIM-E1

This section describes the environmental specifications and safety and approval requirements for 
the WPIM-E1.

Safety —

This unit meets the safety requirements of EN 60950, IEC 950, 73/23/EEC and AS/

NZS 3260.

Electromagnetic Compatibility (EMC) —

This unit meets the EMI requirements of EN 55022, 

EN 50082-1, AS/NZS 3548, and 89/336/EEC.

TELECOM —

91/263/EEC, CTR 12, TS 001, and TS 016.

WPIM-DI

This section describes the environmental specifications and safety and approval requirements for 
the WPIM-DI.

Safety —

This unit meets the safety requirements of UL1950, and CSA C22.2 No. 950.

Electromagnetic Compatibility (EMC) —

This unit meets the EMI requirements of FCC Part 

15, VCCI V-3, and CSA108.8.

TELECOM —

The WPIM-DI meets FCC Part 68 and CS-03.

WPIM-S/T

This section describes the environmental specifications and safety and approval requirements for 
the WPIM-S/T.

Safety —

This unit meets the safety requirements of UC1950, CSA 22.2 No. 950, EN 60950, 

IEC 950 73/23/EEC.

Electromagnetic Compatibility (EMC) —

This unit meets the EMC requirements of FCC 

Part 15, EN 55022, VCCI V-3, CSA/08.8 EN 50082-1, AS/NZS 3548, 89/336/EEC.

Telcom (Future) —

FCC part 68, CS-03.

Summary of Contents for CyberSWITCH CSX400




















































































































































































































































































Reviews:

No comments