Cabletron Systems CyberSWITCH CSX400 User Manual Download Page 36

Page: 36 / 275

About the CSX400

22 CSX400 and CSX400-DC User’s Guide

•

IPX has detected Port DOWN (WAN devices only)

•

IPX RIP has been enabled on interface #

•

IPX RIP has been disabled on interface #

•

IPX SAP has been enabled on interface #

•

IPX SAP has been disabled on interface #

Software and Firmware Upgrades

Software and Firmware upgrades can be performed remotely through the Windows-based
QuickSET utility application. Refer to

Chapter 7

for QuickSET instructions. QuickSET allows

you to retrieve or upgrade the firmware, software, and configuration files from its Firmware
Upgrade menu by selecting the

TFTP/BootP Services

window to access a TFTP (Trivial File

Transfer Protocol) server.

Summary of Contents for CyberSWITCH CSX400




















































































































































































































































































Search results

Summary of Contents for CyberSWITCH CSX400

Reviews:

Cabletron Systems CyberSWITCH CSX400, User Manual, Page: 36 / 275

Search results

Summary of Contents for CyberSWITCH CSX400

Reviews: