Cabletron Systems CyberSWITCH CSX400, User Manual, Page: 157 / 275

General Configuration Using Local Management
CSX400 and CSX400-DC User’s Guide 143
SNMP Traps Screen
The SNMP Traps screen, shown in Figure 61 , allows the user to configure the CSX400 to send
traps to as many as eight remote management workstations. SNMP traps are messages about
network events and device operational statistics.
Access the SNMP Traps screen from the Setup Menu screen by using the arrow keys to highlight
the SNMP Traps option and pressing ENTER. The SNMP Traps screen displays.
Figure 61 SNMP Traps Screen
Trap Table Screen Fields
The following definitions explain each of the SNMP Traps screen fields:
Trap Destination — Use this field to enter the IP address of the management workstation
designated to receive SNMP traps from the CSX400.
Trap Community Name —
Use this field to enter the community name of the management
workstation with the associated IP address. The community name indicates the “access level” of
traps that will be forwarded to the Trap destination.
SNMP TRAPS
Trap Community Name Trap Destination Enable Traps
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
public
public
public
public
public
public
public
public
(NO)
(NO)
(NO)
(NO)
(NO)
(NO)
(NO)
(NO)
SAVE
RETURN
2012_06
CSX400 Local Management Flash Image Version: XX.XX.XX