manualshive.com logo in svg

Cabletron Systems CyberSWITCH CSX400, User Manual, Page: 205 / 275

Share
Download
Cabletron Systems CyberSWITCH CSX400 User Manual Download Page 205

MIB Navigator

CSX400 and CSX400-DC User’s Guide

191

Example:

defroute:

Syntax:

defroute [interface number] [IP address]

Description:

The defroute command allows you to set the default IP route to a 
managed device through the specified interface.

Options:

Not Applicable

Example:

dhcp:

Syntax:

dhcp <options>

Description:

The dhcp command provides a status of the Dynamic Host Configuration 
Protocol feature. Allows the user to enable/disable DHCP globally and 
by interface, and to configure interfaces with server parameters.

Options:

dhcp 

(with no options) Displays DHCP status information.

dhcp enable/disable. 

Enables or disables the DHCP feature globally.

dhcp <IFNUM> enable disable 

Enables or disables the DHCP feature 

by interface.

MIBNav-> arp -a

# Interface
# (SonicInt)
# (SonicInt)
# (SonicInt)
# (SonicInt)

Network Address
122.144.40.111
122.144.48.109
122.144.52.68
122.144.21.43

Physical Address
00.00.0e.12.3c.04
00.00.0e.f3.3d.14
00.00.0e.12.3c.04
00.00.0e.03.1d.3c

Media Type
3(dynamic)
3(dynamic)
3(dynamic)
3(dynamic)

MIBNav-> arp -d 1 122.144.52.68

MIBNav-> arp -s 1 22.44.2.3 00:00:0e:03:1d:3c

051467

MIBNav-> defroute 2 147.152.42.32

051469

Summary of Contents for CyberSWITCH CSX400




















































































































































































































































































Reviews:

No comments