Cabletron Systems 9A600, Configuration Manual

Page: 137 / 158

9A656-04 and 9A600 Configuration Guide 4-23
Creating and Configuring a Reachable Address (Static Route)
4.6.4 Step 4: Associate the Reachable Address with an Interface
The next step in configuring the route is to associate the address with the interface where it
can be reached. This is accomplished using the pnniRouteAddrIfIndex MIB command. Refer
to
Figure 4-11 .
Figure 4-11 Setting the IfIndex for the Static Route (screen 1)
Figure 4-11 contains two callouts that are defined as follows:
A
This section of the screen displays the name of the MIB command used to perform this
procedure (pnniRouteAddrAdvertisePortId) and the OID string the SNMP application is using
to access this information (1.3.6.1.4.1.353.5.4.1.1.19.4.1.6).
A
B